Iron man MK5 2.0 Model

AUTOKING Iron Man MK5 Helmet 1:1 2.0 

Upgraded chip/processor and ear lamp leds changing from blue to red with the all new 2.0 edition.

ABS material, high-quality lacquer surface treatment, the surface effect of the helmet is silver brushed.

-Eye lights, Jarvis greetings, face plates opening and closing, metal sound, voice control operation.

-The helmet fits up to 60cm.

-Powered supply: 4 pieces of AA batteries for the helmet, 1 AAA battery for the remote control (Batteries are not included)

There are 3 different ways can control the helmet.

1. Voice control

 The “Jarvis/JARVIS" wake-up system need to awake before a command can be operated., then you can carry on who following orders. It is possible for you to input voice operation commands successively within 5 seconds after the system is awaken.

2. Touch sensor control

 Fingers touch the sensing area to improve touch sensitivity.

 3. Remote control

 Note of remote control: Turn on the remote power and helmet power, use the first operation of the remote control for automatic random encryption, and if the remote control is turned off during operation, you need to restart the helmet power supply when you turn on the remote control again.

Button A: Control mask integral (on/off)

Button B: Control mask multi-piece (on/off)

Button C: Eye lights switch colors

Button D: Eye lights (on/off)

Button E: Helmet sound (on/off)

Remote Control: 1; Power Switch 2: Signal LED

Security Operation Warning:

1. If left unused for a long period, please remove the batteries from the compartment.

2. Non-professional, do not disassemble the product yourself

 3. No access to excessive voltage use 

4. It is strictly prohibited that the mask was forced the helmet is closing or opening, it may cause irreversible damage to the helmet.

Precautions for startup: Each time the helmet is turned on (or when the system is restarted), you need to ensure that the mask is closed before the power is turned on, if the mask is partially or fully open; then you need to manually close all parts before turn on the power,

Failure analysis:

1: The matching password failed, it is recommended to recharge the remote control and then match the password again.

2: If eye lights continue to flicker slowly, tardy movement, or blurred sound effects, it means the helmet is lack of power, please replace the batteries.

3: Operation failure, the abnormal condition occurs, reboot the system.